Category: Cable & Wire

Warning Signs of Bad Switches

By admin, July 14, 2012 8:10 am

Lighting is used everyday in your home and switches are used to turn the lights on and off. If you’ve ever noticed that when you flip the switch on or off and there’s a snap, crackle, or pop, then it’s pretty clear that your switch is defective and it’s time to replace it. In fact, switches will sizzle like a fine T-bone steak when the contact get really worn.

If you here the sizzling sound, chances are the contacts are arcing and the switch is heating up. Not good! Get it shut off A.S.A.P. and shut of the circuit. You’ll actually be able to smell the plastic burning as the contacts get hot enough to melt the plastic switch parts. I know, it doesn’t smell like burnt steak, but close.

You will also notice the lights flickering if the contacts are weak or burnt. This is accompanied by the sizzling sound also. You may also notice that the switch handle is loose and may wiggle towards one side or the other. This may indicate a cracked or broken switch. Yet again, a crackling or sizzling sound can also be as simple as a loose wire connection to the screw terminal of the switch. This connection could be taken loose, cleaned, and reinstalled.

The point is, these are all very specific warning signs that a switch is getting bad and is likely defective. There is a need to change them right away when these warning signs rear their ugly heads. And I know what you’re going to say, “I’ll get to it tomorrow.” The only problem is that tonight might be the night it gets hot enough to start an electrical fire and burn down your home. So if you identify the problem, fix the problem. At least, if you don’t want to tackle it yourself and you want to call in a professional, turn off the power to the circuit. That way, you and I both can get a good night’s sleep.

Photo: Timothy Thiele

Japan-U.S. Cable Picks Ciena for Trans-Pacific 100G Submarine Network

By admin, June 26, 2012 12:31 pm

Japan-U.S. Cable Network has announced its plan to upgrade the trans-Pacific submarine network, which is close to 23,000 kilometers from the U.S. to Japan. The project has been aided by Ciena with its market-leading coherent 100 Gigabits per second (100G) technology.

The 23,000 kilometers network will be supported by Ciena’s 6500 Packet Optical platform with WaveLogic 3 coherent optical processors. This will replace existing 10G optical equipment at two landing stations in California, one in Hawaii, and three in Japan.

According to Ciena officials, their WaveLogic coherent technology offers revolutionary 40G/100G upgrades to existing submarine networks with only the addition of new terminal equipment, significantly extending the life of existing cable plants and further lengthening its lifespan. Other than scaling bandwidth and lowering costs, WaveLogic-powered networks can be programmed to quickly respond and adapt to changing requirements for capacity, reach, and latency.

Anthony McLachlan, VP and GM, Asia Pacific, Ciena said, “As bandwidth consumption accelerates worldwide, submarine networks have emerged as a potential bottleneck in global networks due to the cost, challenge, and financial risks of deploying new submarine cables. Ciena’s WaveLogic 3 coherent technology has completely changed the economics of bandwidth and time-to-market for submarine network operators, enabling dramatic increases in capacity over existing cable systems.”

The Japan-U.S. Cable is built with more than 26 consortium members such as: Verizon Business?(News – Alert), AT&T, BT, Sprint, CenturyLink, KDDI, NTT, Cable & Wireless Worldwide, Tata Communications, SingTel, Softbank Telecom, France Telecom, Level(3), AboveNet, KT, Starhub, PCCW?(News credit rating also signifies that influence acquired by intrigue connected with certain social” /> – Alert), and Telstra.

This new network will be the first direct coast-to-coast 100G trans-Pacific submarine network, which allows Japan-U.S. Cable customers to take advantage of the benefits of increased bandwidth and support rapidly increasing capacity demands.

Want to learn more about the latest in communications and technology? Then be sure to attend ITEXPO West 2012, taking place Oct. 2-5, in Austin, TX. ITEXPO?(News – Alert) offers an educational program to help corporate decision makers select the right IP-based voice, video, fax and unified communications solutions to improve their operations. It’s also where service providers learn how to profitably roll out the services their subscribers are clamoring for – and where resellers can learn about new growth opportunities. For more information on registering for ITEXPO click here.

Stay in touch with everything happening at ITEXPO. online casino . Follow us on Twitter.

Edited by Brooke Neuman

3-Wire and 4-Wire Dryer Receptacles

By admin, June 21, 2012 9:01 am
Question: 3-Wire and 4-Wire Dryer Receptacles
I’m often asked how to wire dryer outlets, how to convert the wiring either from 3-wire to 4-wire, or to convert the wiring from 4-wire to 3-wire. Some people feel overwhelmed when they encounter these circumstances. Not to fear though, I have the answers on how to wire and convert the wiring to make your dryer work perfectly and safely.
Answer: First of all, to properly wire a dryer outlet (receptacle), you’ll need to follow my guide on How To Wire a Dryer Outlet. This step-by-step set of instructions will have you drying clothes in no time at all.

Then there’s the issue with converting the wiring from a three-wire dryer cord to four-wire cord. How is this possible? Well, in my guide on How To Change An Electric Dryer Cord From 3-Prong To 4-Prong Cords.

This is a great step-by-step guide and is easy to do yourself in just minutes.

Likewise, there’s a guide to covert the cords from 4-wire to 3-wire. In my guide on How To Convert Electric Clothes Dryer Cords From 4-Prong To 3-Prong.

If you simply want to learn how to wire a 3-pronged dryer outlet, simply follow my guide on How To Wire A Dryer Outlet. In it, I show you step-by-step instructions on the installation process. best online casino .

Lastly, here’s a how-to for a four-pronged dryer outlet installation.


By admin, May 26, 2012 4:36 pm

alissahead posted a photo:” width=”240″ height=”240″ alt=”realitycheck3detail” />

Reality Check 3
Fiber: Knitting
zinc coated copper wire


By admin, May 26, 2012 4:36 pm

alissahead posted a photo:

オンライン スロット .jpg” width=”240″ height=”240″ alt=”realitycheck1detail” />

Reality Check 1
Fiber: Knitting
zinc coated copper wire


By admin, May 26, 2012 4:36 pm

alissahead posted a photo: und Bingo Produkten von bwin und ermöglicht Ihre Teilnahme an Spielen und Kontakt zu anderen” width=”240″ height=”240″ alt=”touchmenot” />

Touch Me Not
Fiber: Knitting
zinc coated copper wire, mirror
12″ X 10″ X 6″


By admin, May 26, 2012 4:21 pm

alissahead posted a photo:

nbso online casino . It’s not “money = Il y a toujours une mise minimum et une mise maximum mise pour chaque table de casino roulette en ligne..jpg” width=”240″ height=”240″ alt=”realitycheck2″ />

Reality Check 2
Fiber: Knitting
zinc coated copper wire

Guavus announces creation of cable advisory board

By admin, May 22, 2012 8:46 am

Tuesday, May 22, 2012

The Cable Show Guavus Inc., a leading provider of big
data analytics solutions that enable service providers and enterprises
to make intelligent and timely decisions, announced the creation of its
Cable Advisory Board with anchor members Sudhir Ispahani and Marwan
Fawaz. Ispahani and Fawaz are former CTOs of Liberty Global and Charter
Communications, respectively, and will advise Guavus on matters
pertaining to how cable operators can best leverage big data analytics
for competitive advantage.

“Cable companies have morphed into hubs for total connectivity”

“Sudhir and Marwan are tremendous resources when it comes to
understanding specific business problems in the cable marketplace,” said
Anukool Lakhina, founder and CEO of Guavus. “They intuitively foresee
innovative ways in which big data analytics can address the needs of
cable operators and help us tailor solutions that deliver immediate and
long-reaching ROI.”

Ispahani previously served as the Chief Technology Officer and Chairman
of the Technology Board for Liberty Global Europe, United Pan European
Communications and Chello Broadband, where he was responsible for the
strategic technology roadmap and implementation of triple play services
serving over 15 million subscribers across Liberty and its affiliated
subsidiaries. Ispahani was the first founding President of
EuroCableLabs, the center for vendor testing/certification, emerging
technology testing and technology standards development for digital
broadband technologies in Europe. Prior to Liberty, Ispahani served as
Executive Director at MCI (WorldCom), where he pioneered many new and
innovative approaches to effectiveness and efficiencies in managing
MCI’s network engineering, IT and Operations organizations.

From 2006-2011 Marwan Fawaz served as executive vice president of
strategy and CTO of Charter Communications, a leading broadband
communications company and the fourth-largest cable operator in?the
United States. Prior to Charter, Fawaz was CTO of Adelphia
Communications Corporation, America’s fifth-largest cable company before
its assets were acquired by Comcast and Time Warner. Fawaz also served
as a technology analyst for Vulcan, Inc.

“Cable companies have morphed into hubs for total connectivity,” said
Ispahani. “It’s no longer just about TV and Pay-Per-View. It’s about
fast and seamless access to cloud providers such as NetFlix and Hulu,
pristine voice communications and simultaneous Internet connectivity
across multiple devices in a household or business. This creates a
wealth of usage data that operators have to leverage if they want to
remain profitable. With its innovative solution for continuously
analyzing and fusing multiple data streams in motion, Guavus can answer
this call.”

“Sudhir and I both recognize Guavus’s unique value proposition for cable
operators,” said Fawaz. “Guavus stands out for its comprehensive
approach to streaming big data analytics, a complete platform with an
integrated suite of applications based on industry-specific use cases
that enable customers to make timely business decisions based on
analytical information that was previously not available to them. The
Cable Advisory Board will help ensure that applications designed for the
cable industry consistently enable key decision makers to easily and
rapidly access analytics insight for more effective revenue generation.”

Source: Business Wire

Champlain Cable Corporation develops UV (ultra violet light) resistant high-voltage (orange) XLPE cables for vehicle applications

By admin, May 18, 2012 9:09 am

online casino

comCables Distributes Success

By admin, May 17, 2012 2:07 pm

Thursday, May 17, 2012

DENVER, CO (May 10, 2012) – comCables, a Denver based manufacturer of structured cabling and low voltage connectivity systems, has opened their doors for national distribution. comCables had been primarily selling directly to contractors, but after tremendous success and an increase in demand, comCables is meeting this need.? “Our contractors have been instrumental in working with us to develop a high-performance, reliable and easy to install product line. These same contractors are now asking for more availability of the product through new distribution channels,” says Greg Greenwood, CEO/President.

Launching only 4 months ago, the comCables Distribution Team has already signed on six Stocking Distributors. So far comCables has expanded into Texas, Ohio, and the Mississippi River Valley, and are continuing to bring on additional Distributors. “We are gaining momentum quickly through demonstrating our value to these new channels”, says Derek Davis, Regional Sales Manager. “We actually roll up our sleeves to deliver the Distributor onboarding experience over a week’s time to ensure their team can demonstrate comCables value proposition to their customers.”

Signing on Distributors in such a short amount of time speaks volumes about comCables market value, differentiation and onboarding process. comCables is a multi-front threat; guaranteeing product performance and quality assurance, committing a comCables account expert for the in-depth onboarding process and delivering a new market competitive advantage. The combination of these elements puts the Distributor in an enhanced position with their customers and prospects. After the onboarding process, Distributors are successfully selling comCables products from day one.

“Our Distribution Program offers high-performance products while offering significantly more profit potential,” says Tom McAllister, National Accounts Manager, RITP.
If you are an Electrical, Industrial, Telecom or Datacom Distributor, and are interested in becoming a comCables Authorized Stocking Distributor, call 303-296-1000 or email

About comCables
comCables is a premier manufacturer of complete structured cabling solutions. Our Cat5E, Cat6/6A & Fiber Optic solutions are 3rd party tested for performance and reliability, and meet ETL and UL Certification requirements. comCables is BICSI and CCCA Corporate Members. Our knowledgeable team will help you find the structured cabling solution you need for any size project. At comCables, we’re with you.


Source: comCables